talos-rpi5/README.md

Talos CM5 Builder

Custom Talos Linux images for Raspberry Pi 5 / CM5 on Compute Blade hardware.

The official Talos Image Factory does not support CM5 — the mainline kernel lacks CM5 device trees and RP1 driver support. This builder uses the RPi downstream kernel (via talos-rpi5/talos-builder patches) to produce working CM5 images with our extensions and overclock config.

Current versions

Component	Version
Talos Linux
RPi Kernel
iscsi-tools
util-linux-tools

Image tags

Release images are published to docker.io/svrnty/talos-rpi5 with the format:

v<talos>-k<kernel>-<revision>

For example: v1.12.3-k6.12.47-2

Segment	Meaning
v1.12.3	Upstream Talos Linux version
k6.12.47	RPi downstream kernel version
2	Build revision (bumped for config/patch changes on the same upstream versions)

Usage

Install from raw disk image

Download metal-arm64.raw.zst from the latest release and flash to eMMC:

zstd -d metal-arm64.raw.zst -o metal-arm64.raw
# Flash to eMMC/SD via your preferred tool (dd, balenaEtcher, etc.)

Upgrade an existing node

talosctl upgrade --image docker.io/svrnty/talos-rpi5:v1.12.3-k6.12.47-2

Note: In-place upgrades use GRUB with --no-nvram to work around the RPi5/CM5 SetVariableRT firmware limitation. This patch is included but not yet tested in production — re-flashing the disk image is the proven fallback.

# Fallback: re-flash method
zstd -d metal-arm64.raw.zst -o metal-arm64.raw
# Flash to eMMC/SD via your preferred tool

What's included

• RPi downstream kernel with CM5/RP1 support (4K page size, aligned with upstream Talos)
• GRUB bootloader with --no-nvram for reliable talosctl upgrade on RPi5/CM5
• Overclock: 2.6GHz (arm_freq=2600, over_voltage_delta=50000, arm_boost=1)
• Extensions: iscsi-tools, util-linux-tools

Known issues

No serial console output after boot (Fixed)

The overlay was using console=ttyAMA0 (GPIO 14/15 UART) but the RPi5/CM5 debug UART is ttyAMA10. Fixed by switching to console=ttyAMA10,115200 and adding earlycon=pl011,0x107d001000,115200n8 for early boot output. Also added [pi5] enable_uart=0 to config.txt to match upstream and avoid U-Boot compatibility issues.

Upstream: talos-builder#4

Install disk config ignored on SBCs

Talos ignores the machine.install.disk config field on SBC platforms. You must flash the disk image directly to your target disk (eMMC, SD, NVMe). For NVMe boot, dd the metal image to the NVMe drive and configure the EEPROM boot order (BOOT_ORDER=0xf416, PCIE_PROBE=1).

Upstream: talos-builder#22

Roadmap

This project targets production-ready Talos clusters on RPi5/CM5 hardware.

Status	Milestone	Description
Untested	4K page size	Aligned with upstream Talos kernel config. Reduces memory overhead and improves workload compatibility (Longhorn, jemalloc, F2FS, etc.).
Untested	Reliable in-place upgrades	Force GRUB bootloader with --no-nvram on arm64 to work around the SetVariableRT firmware limitation (talos-builder#21).
Untested	Serial console fix	Use correct debug UART (ttyAMA10) with earlycon for early boot output.
Untested	NVMe boot support	dd image to NVMe + set EEPROM BOOT_ORDER=0xf416 and PCIE_PROBE=1. Kernel has CONFIG_BLK_DEV_NVME=y built-in.

Building

For local builds, CI/CD setup, runner configuration, and project structure, see TECHNICAL.md.

License

This project is licensed under the Mozilla Public License 2.0.

It builds upon the following MPL 2.0 licensed upstream projects:

• siderolabs/talos — Talos Linux OS
• siderolabs/pkgs — Talos package definitions
• talos-rpi5/sbc-raspberrypi5 — Raspberry Pi 5 SBC overlay

Our patches to these projects are in the patches/ directory and are distributed under the same MPL 2.0 terms.