Mathias Beaulieu-Duncan
a9cc56e315
All checks were successful
Build Talos CM5 Image / build (push) Successful in 2m53s
The dtparam=pciex1_gen=3 was being appended after the [all] section, but RPi firmware requires PCIe dtparams in the [pi5] section. Switch from configTxtAppend to full configTxt replacement to control section ordering. Also add dtparam=pciex1 to explicitly enable the external PCIe link. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
32 lines
968 B
Plaintext
32 lines
968 B
Plaintext
# See https://www.raspberrypi.com/documentation/computers/configuration.html
|
|
# Reduce GPU memory to give more to CPU.
|
|
gpu_mem=32
|
|
# Enable maximum compatibility on both HDMI ports;
|
|
# only the one closest to the power/USB-C port will work in practice.
|
|
hdmi_safe:0=1
|
|
hdmi_safe:1=1
|
|
# Load U-Boot.
|
|
kernel=u-boot.bin
|
|
# Forces the kernel loading system to assume a 64-bit kernel.
|
|
arm_64bit=1
|
|
# Run as fast as firmware / board allows.
|
|
arm_boost=1
|
|
# Enable the primary/console UART (globally).
|
|
enable_uart=1
|
|
# Disable UART on Pi5 to avoid U-Boot compatibility issue.
|
|
# The debug UART (ttyAMA10) is always active regardless of this setting.
|
|
[pi5]
|
|
enable_uart=0
|
|
# Enable PCIe and force Gen 3 for NVMe (~800 MB/s vs ~400 MB/s Gen 2)
|
|
dtparam=pciex1
|
|
dtparam=pciex1_gen=3
|
|
[all]
|
|
# Disable Bluetooth.
|
|
dtoverlay=disable-bt
|
|
# Disable Wireless Lan.
|
|
dtoverlay=disable-wifi
|
|
# CM5 Overclock — 2.6GHz stable on Compute Blade with heatsink
|
|
arm_freq=2600
|
|
over_voltage_delta=50000
|
|
arm_boost=1
|