@routing @countryfoot @countryspeeds
Feature:  Testbot - Country Profile Selection

    # Check that country data is being selected
    # CHE (a) and FIN (c) support foot on cycleway
    # FRA (g) does not support  foot on cycleway
    # BEL (i) and FIN (c) support foot on cycleway
    # BEL (i) and IRL (o) support Bridleway
    # GRC (m) and IRL (o) support trunk and bridleway
    # LIU (s) is not a country in list so looks like worldwide
    # so
    # GRC (m) and LIU (s) support trunk
    # LIU (s) does not support cycleway or bridleway
    # Worldwide (u) is an area without boundaries (so like s)
    
    Scenario: Country Profile Selection - highway chosen for country
    
        Given the extract extra arguments "--location-dependent-data test/data/countrytest.geojson"
        And the partition extra arguments "--threads 1"
        And the customize extra arguments "--threads 1"

        And the profile file "countryfoot" initialized with
        """
        profile.uselocationtags.countryspeeds = true
        """
        
        And the node locations
            | node | lat        | lon      | 
            | a    | 9.5        | 5.0      |
            | b    | 9.5        | 10.0     |
            | c    | 9.5        | 15.0     |
            | d    | 9.0        | 5.0      |
            | e    | 9.0        | 10.0     |
            | f    | 9.0        | 15.0     |
            | g    | 8.5        | 5.0      |
            | h    | 8.5        | 10.0     |
            | i    | 8.5        | 15.0     |
            | j    | 8.0        | 5.0      |
            | k    | 8.0        | 10.0     |
            | l    | 8.0        | 15.0     |
            | m    | 7.5        | 5.0      |
            | n    | 7.5        | 10.0     |
            | o    | 7.5        | 15.0     |
            | p    | 7.0        | 5.0      |
            | q    | 7.0        | 10.0     |
            | r    | 7.0        | 15.0     |
            | s    | 6.5        | 5.0      |
            | t    | 6.5        | 10.0     |
            | u    | 6.5        | 15.0     |
            
        And the ways
            | nodes | highway     | comment
            | ab    | cycleway    | CHE - FIN yes
            | bc    | cycleway    |
            | ad    | cycleway    | CHE - FRA no
            | dg    | cycleway    |
            | gj    | cycleway    |
            | cf    | bridleway   | FIN - BEL no
            | fi    | bridleway   |
            | gh    | trunk       | FRA - BEL no
            | hi    | trunk       |
            | il    | bridleway   | BEL - IRL yes 
            | lo    | bridleway   |
            | or    | trunk       | IRL - world yes
            | ru    | trunk       |
            | mn    | trunk       | GRC - IRL yes
            | no    | trunk       |
            | mp    | trunk       | GRC - liu yes
            | ps    | trunk       |

        And the partition extra arguments "--threads 1"
        And the customize extra arguments "--threads 1"

        
        When I route I should get
            | waypoints | route          | status | message                          |
            | a,c       | ab,bc,bc       | 200    |    |
            | a,j       |                | 400    | Impossible route between points  |
            | c,i       |                | 400    | Impossible route between points  |
            | g,i       |                | 400    | Impossible route between points  |
            | i,o       | il,lo,lo       | 200    |    |
            | o,u       | or,ru,ru       | 200    |    |
            | m,o       | mn,no,no       | 200    |    | 
            | m,s       | mp,ps,ps       | 200    |    |